Publications

2021

Investigation of material failure in micro-stamping of metallic bipolar plates Zhang, P.Pereira, M.P.Rolfe, B.F., …Hodgson, P.Weiss, M.Journal of Manufacturing Processes2022, 73, pp. 54–66.

Optimising part quality in the flexible roll forming of an automotive component.Abeyrathna, B.Ghanei, S.Rolfe, B.Taube, R.Weiss, M. International Journal of Advanced Manufacturing Technology2021

Understanding material behaviour of ultrafine-grained aluminium nano-composite sheets with emphasis on stretch and bending deformation. Deb, S., Panigrahi, S.K., Weiss, M.(2021) Journal of Materials Processing Technology, 293.

The impact of L12 dispersoids and strain rate on the Portevin-Le-Chatelier effect and mechanical properties of Al–Mg alloys. Bakare, F., Schieren, L., Rouxel, B., Jiang, L., Langan, T., Kupke, A., Weiss, M., Dorin, T.(2021) Materials Science and Engineering A, 811.

Microstructure effects on the material behaviour of magnesium sheet in bending dominated forming. Shiromani Gangoda Desinghege, Peter Hodgson, Matthias Weiss, Journal of Materials Processing Technology,Volume 289,2021,116951

Understanding size effects and forming limits in the micro-stamping of industrial stainless steel foils. Weiss, Matthias, Zhang, Peng, Pereira, Michael, Rolfe, Bernard B. F., Wilkosz, Daniel E. and Hodgson, Peter D. 2021, Metals, vol. 11, no. 1, doi: 10.3390/met11010038.

2020

Forming-Induced Residual Stress and Material Properties of Roll-Formed High-Strength Steels Yong Sun, Vladimir Luzin, Yixin Duan, Rameshkumar Varma, Lei Shi & Matthias Weiss  Automotive Innovation (2020)  Published: 14 August 2020

Strain rate effect on the fracture behavior of the AA5754 aluminum alloy Bueno, M., Galdos, L., de Argandoña, E.S., Weiss, M. , Rolfe, B., Lou, Y., Mendiguren, J. (2020) Procedia Manufacturing
47, pp. 1264-1269

Grain size and void formation in Mg alloy AZ31 Mohamadi Azghandi, S.H., Weiss, M., Arhatari, B.D., Barnett, M.R.(2020) Journal of Alloys and Compounds 816,152618

The Effect of Grain Size on the Bend Forming Limits in AZ31 Mg Alloy Azghandi, S.H.M., Weiss, M., Barnett, M.R. (2020) JOM 72(7), pp. 2586-2596

Plastic instability and fracture of ultra-thin stainless-steel sheet Zhang, P., Pereira, M.P., Abeyrathna, B., Rolfe, B. , Hodgson, P., Weiss, M. (2020) International Journal of Solids and Structures 202, pp. 699-716

2019

Micro-roll forming of stainless steel bipolar plates for fuel cells Abeyrathna, B., Zhang, P., Pereira, M.P., Wilkosz, D., Weiss, M. (2019) International Journal of Hydrogen Energy 44(7), pp. 3861-3875

Experimental in-situ verification of the unloading mechanics of dual phase steels Kupke, A., Madej, L., Hodgson, P.D., Weiss, M. (2019) Materials Science and Engineering A
760, pp. 134-140

The effect of annealing treatment on the evolution of the microstructure, the mechanical properties and the texture of nano SiC reinforced aluminium matrix alloys with ultrafine grained structure Deb, S., Panigrahi, S.K., Weiss, M. (2019) Materials Characterization
154, pp. 80-93

Improving the shear test to determine shear fracture limits for thin stainless steel sheet by shape optimisation Zhang, P., Pereira, M.P., Abeyrathna, B., Rolfe, B. , Wilkosz, D.E., Weiss, M. International Journal of Mechanical Sciences 164,105116

Analysis of material behaviour and shape defect compensation in the flexible roll forming of advanced high strength steel Ghanei, S., Abeyrathna, B., Rolfe, B., Weiss, M.(2019) IOP Conference Series: Materials Science and Engineering 651(1),012064

A first step towards an in-line shape compensation for UHSS roll forming Abeyrathna, B., Rolfe, B., Weiss, M. 2019 IOP Conference Series: Materials Science and Engineering 651(1),012063

 

2018

Roll formability of aluminium foam sandwich panels
Weiss, M., Abeyrathna, B., Pereira, M. (2018) International Journal of Advanced Manufacturing Technology, pp. 1-13. Article in Press.

Effect of the forming method on part shape quality in cold roll forming high strength Ti-6Al-4V sheet
Badr, O.M., Rolfe, B., Weiss, M. (2018) Journal of Manufacturing Processes, 32, pp. 513-521.

Influence of the Strain History on TWIP Steel Deformation Mechanisms in the Deep-Drawing Process
Lapovok, R., Timokhina, I., Mester, A.-K., Weiss, M., Shekhter, A. (2018) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp. 1-15. Article in Press.

The numerical prediction of ductile fracture of martensitic steel in roll forming
Deole, A.D., Barnett, M.R., Weiss, M. (2018) International Journal of Solids and Structures, . Article in Press.

 

2017

Deformation in Micro Roll Forming of Bipolar Plate
Zhang, P., Pereira, M., Rolfe, B., Daniel, W., Weiss, M. (2017) Journal of Physics: Conference Series, 896 (1), art. no. 012115.

Prototyping of automotive components with variable width and depth
Abeyrathna, B., Rolfe, B., Harrasser, J., Sedlmaier, A., Ge, R., Pan, L., Weiss, M. (2017) Journal of Physics: Conference Series, 896 (1), art. no. 012092, .

The effect of process and geometric parameters on longitudinal edge strain and product defects in cold roll forming
Abeyrathna, B., Rolfe, B., Weiss, M. (2017) International Journal of Advanced Manufacturing Technology, 92 (1-4), pp. 743-754.

Applying a new constitutive model to analyse the springback behaviour of titanium in bending and roll forming
Badr, O.M., Rolfe, B., Zhang, P., Weiss, M. (2017) International Journal of Mechanical Sciences, 128-129, pp. 389-400.

Buckling in low pressure tube hydroforming
Nikhare, C., Weiss, M., Hodgson, P.D. (2017) Journal of Manufacturing Processes, 28, pp. 1-10.

The Effect of Microstructure and Pre-strain on the Change in Apparent Young’s Modulus of a Dual-Phase Steel
Kupke, A., Hodgson, P.D., Weiss, M. (2017) Journal of Materials Engineering and Performance, 26 (7), pp. 3387-3398.

Bending behaviour and oil canning in roll forming a steel channel
Weiss, M., Abeyrathna, B., Gangoda, D.S., Mendiguren, J., Wolfkamp, H. (2017) International Journal of Advanced Manufacturing Technology, 91 (5-8), pp. 2875-2884.

Evolution of elastic modulus in roll forming
Abvabi, A., Mendiguren, J., Kupke, A., Rolfe, B., Weiss, M. (2017) International Journal of Material Forming, 10 (3), pp. 463-471.

Local deformation in roll forming
Abeyrathna, B., Rolfe, B., Hodgson, P., Weiss, M. (2017) International Journal of Advanced Manufacturing Technology, 88 (9-12), pp. 2405-2415.

Material characterization in flexible flow splitting: Materialcharakterisierung beim Flexiblen Spaltprofilieren [Material characterization in flexible flow splitting: Materialcharakterisierung beim Flexiblen Spaltprofilieren]
Neuwirth, M., Mester, K., Weiss, M., Bruder, E. (2017) Materialwissenschaft und Werkstofftechnik, 48 (1), pp. 53-60.

Effect of coil set on shape defects in roll forming steel strip
Weiss, M., Abeyrathna, B., Rolfe, B., Abee, A., Wolfkamp, H. (2017) Journal of Manufacturing Processes, 25, pp. 8-15.

 

2016

Numerical analysis of the flexible roll forming of an automotive component from high strength steel
Abeyrathna, B., Abvabi, A., Rolfe, B., Taube, R., Weiss, M. (2016) IOP Conference Series: Materials Science and Engineering, 159 (1), art. no. 012005.

Constitutive modelling of high strength titanium alloy Ti-6Al-4 v for sheet forming applications at room temperature
Badr, O.M., Barlat, F., Rolfe, B., Lee, M.-G., Hodgson, P., Weiss, M. (2016) International Journal of Solids and Structures, 80, pp. 334-347.

A first step towards a simple in-line shape compensation routine for the roll forming of high strength steel
Dr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof. Peter Hodgson, Dr Matthias (2016) vol. 9, pp. 423-434, International Journal of Material Forming.

Evolution of elastic modulus in roll forming
Dr Armin Abvabi, Dr Joseba Mandiguren, Dr Andreas Kupke, A/Prof Bernard Rolfe, Dr Matthias Weiss (2016) Article in Press, pp. 1-9, International Journal of Material Forming.

An extension of the flower pattern diagram for roll forming
Dr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof. Peter Hodgson, Dr Matthias Weiss (2016) vol. 83, pp. 1683-1695, International Journal of Advanced Manufacturing Technology.

An inverse routine to predict residual stress in sheet material
Mr Akbar Abvabi, A/Prof Bernard Rolfe, Prof. Peter Hodgson, Dr Matthias Weiss (2016) vol. 652, pp. 99-104, Materials Science and Engineering A, C1

An analytical model for web-warping in variable width flexible roll forming
Dr Jingsi Jiao, A/Prof Bernard Rolfe, Dr Joseba Mendiguren, Dr Matthias Weiss (2016), pp. 1-15, International Journal of Advanced Manufacturing Technology

 

2015

Improvement of accuracy in a free bending test for material characterization
Dr Joseba Mendiguren,Dr Armin Abvabi, A/Prof Bernard Rolfe, Dr Matthias Weiss (2015) vol. 103, pp. 288-296, International Journal of Mechanical Sciences

Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels
Dr Erik Pavlina, Mr C Lin, Dr Joseba Mendiguren, A/Prof Bernard Rolfe, Dr Matthias Weiss (2015) vol. 24, pp. 3737-3745, Journal of Materials Engineering and Performance

The influence of residual stress on a roll forming process
Dr Armin Abvabi,A/Prof Bernard Rolfe, Prof. Peter Hodgson, Dr Matthias Weiss (2015) vol. 101-102, pp. 124-136, International Journal of Mechanical Sciences

Forming of high strength titanium sheet at room temperature
Mr Ossama Mamdouh Mohamed Badr, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2015) vol. 66, pp. 618-626, Materials and design, Amsterdam, The Netherlands

An extension of the flower pattern diagram for roll forming
Mr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2015) vol. , pp. -,International Journal of Advanced Manufacturing Technology

A first step towards a simple in-line shape compensation routine for the roll forming of high strength steel
Mr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2015) vol. , pp. -, International Journal of Material Forming

On the definition of an kinematic hardening effect graph for sheet metal forming process simulations
Dr Joseba Mendiguren, A/Prof Bernard Rolfe, Dr Matthias Weiss (2015) vol. 92, pp. 109-120, International Journal of Mechanical Sciences

On the Bauschinger effect in dual phase steel at high levels of strain
Dr Matthias Weiss, Dr Andreas Kupke, Mr. P Manach, Dr L Galdos, Prof. Peter Hodgson, (2015) vol. 643, pp. 127-136, Materials Science and Engineering A

An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width
Mr Jingsi Jiao, A/Prof Bernard Rolfe, Dr Joseba Mendiguren, Dr Matthias Weiss (2015) vol. 90, pp. 228-238, International Journal of Mechanical Sciences

 

2014

An experimental investigation of edge strain and bow in roll forming a V-section
Mr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. 773-774, pp. 153-159, Materials science forum, Durnten-Zurich, Switzerland

Roll-formability of cryo-rolled ultrafine aluminium sheet
Mr Jascha Dominik Marnette, Dr Matthias Weiss, Prof Peter Hodgson (2014) vol. 63, pp. 471-478, Materials and design, London, England

Springback investigation in roll forming of a V-section
Mr Akbar Abvabi, Dr Joseba Mendiguren, A/Prof Bernard Rolfe, Dr Matthias Weiss (2014) vol. 553, pp. 643-648, Applied mechanics and materials, Pfaffikon, Switzerland

Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products
Mr Ossama Mamdouh Mohamed Badr, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. , pp. 872-875, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

Characterization of a dual phase steel using tensile and free bending tests
Dr Joseba Mendiguren, Stijn Hanselmanb, Eisso Atzemac, Prof Peter Hodgson, A/Prof Bernard Rolfe, Dr Matthias Weiss (2014) vol. , pp. 659-662, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

Sensitivity analysis of roll load, torque and material properties in the roll forming process
Mr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. , pp. 900-903, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

Effect of temper rolling on final shape defects in a V-section roll forming process
A Abvabia, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. , pp. 896-899, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel
Mr Ossama Mamdouh Mohamed Badr, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. , pp. 876-879, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

Numerical investigation on the effect of skin passing and roller levelling on the bending behaviour of mild steel
Mr Jascha Dominik Marnette, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2014) vol. , pp. 452-455, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, College Park, Maryland

 

2013

Theoretical extension of elastic-perfectly plastic deformation length in roll forming of a channel section
Roohollah Azizitafti, Hassan Moslemi Naeini, Mehdi Salmani Tehrani, A/Prof Bernard Rolfe, Dr Matthias Weiss (2013) vol. 47, pp. 33-45, International journal of materials and product technology, Geneva, Switzerland

Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels
Mr Ossama Mamdouh Mohamed Badr, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2013) vol. 47, pp. 150-161, International journal of materials and product technology, Geneva, Switzerland

The effect of the die radius profile accuracy on wear in sheet metal stamping
Dr Michael Pereira, Dr Matthias Weiss, A/Prof Bernard Rolfe, A/Prof Tim Hilditch (2013) vol. 66, pp. 44-53, International journal of machine tools and manufacture, Amsterdam, The Netherlands

Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation
Dr Matthias Weiss, Dr Adam Taylor, Prof Peter Hodgson, A/Prof Nicole Stanford (2013) vol. 61, pp. 5278-5289, Acta materialia, Amsterdam, The Netherlands

Cryo-rolling and formability of 2024 aluminium
Dr Adam Taylor, Dr Matthias Weiss, A/Prof Tim Hilditch, Prof Peter Hodgson, A/Prof Nicole Stanford (2013) vol. 765, pp. 434-438, Materials science forum, Stafa-Zurich, Switzerland

Product defect compensation by robust optimization of a cold roll forming process
Harmen Wiebenga, Dr Matthias Weiss, A/Prof Bernard Rolfe, A. H. Van Den Boogaard (2013) vol. 213, pp. 978-986, Journal of materials processing technology, Amsterdam, The Netherlands

Development of an inverse routine to predict residual stresses in the material based on a bending test
Dr Armin Abvabi, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2013) vol. 554-557, pp. 949-956, Key engineering materials, Stafa-Zurich, Switzerland

The numerical investigation of the material behavior of high strength sheet materials in incremental forming
Mr Ossama Mamdouh Mohamed Badr, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2013) vol. , pp. 513-519, NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, College Park, Maryland

A first step towards in-line shape compensation for roll forming applications
Mr Buddhika Abeyrathna, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2013) vol. , pp. 93-97, IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, Zurich, Switzerland

Investigation on forming limit properties of dual phase steel
Libo Pan, A/Prof Bernard Rolfe, Dr Alireza Asgari, Dr Matthias Weiss, Zhijian Zhang (2013) vol. , pp. 850-856, NUMIFORM 2013 : Proceedings of the 11th International Conference on Numerical Methods in Industrial Forming Processes, Melville, N.Y.

 

2012

Comparison of bending of automotive steels in roll forming and in a V-die
Dr Matthias Weiss, Mr Jascha Dominik Marnette, Preston Wolfram, Jon Larranaga, Prof Peter Hodgson (2012) vol. 504-506, pp. 797-802, Key engineering materials, Stafa-Zurich, Switzerland

Effect of residual stress on the bending of aluminium
Dr Matthias Weiss, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Richard Yang (2012) vol. 212, pp. 877-883, Journal of materials processing technology, Lausanne, Switzerland

Influence of heat treatment on the microstructure, texture and formability of 2024 aluminium alloy
Charles K. S. Moy, Dr Matthias Weiss, Junhai Xia, G Sha, Prof Simon Ringer, Gianluca Ranzi (2012) vol. 552, pp. 48-60, Materials science and engineering A, Lausanne, Switzerland

Formability of cryo-rolled aluminium in uniaxial and biaxial tension
Dr Adam Taylor, Dr Matthias Weiss, A/Prof Tim Hilditch, A/Prof Nicole Stanford, Prof Peter Hodgson (2012) vol. 555, pp. 148-153, Materials science and engineering A, Lausanne, Switzerland

Roll forming cryo-rolled nano-structured aluminium sheet
Mr Jascha Dominik Marnette, Dr Matthias Weiss, Prof Peter Hodgson (2012) vol. , pp. 1-5, AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, Wollongong, N.S.W.

Approach for testing the material behavior in roll forming in a small scale
Dr Matthias Weiss, Mr Buddhika Abeyrathna, Mr Jascha Dominik Marnette, Mr Ossama Mamdouh Mohamed Badr, Dr Armin Abvabi, Mr Jingsi Jiao, Prof Peter Hodgson (2012) vol. , pp. 1-6, IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, Mumbai, India

Effect of roller leveling on the bending behaviour of aged steel strip
Mr Jascha Dominik Marnette, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2012) vol. , pp. 699-702, Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, Krakow, Poland

Effect of tensile pre-strain on bending and unloading of automotive steels
Dr Matthias Weiss, Dr Andreas Kupke, A/Prof Bernard Rolfe (2012) vol. , pp. 409-415, IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, Mumbai, India, E1-1

 

2011

Effect of thermal treatment on the bending properties of pre-strained carbon steel
Dr Matthias Weiss, E. Hemmerich, Prof Peter Hodgson, A/Prof Bernard Rolfe (2011) vol. 528, pp. 4528-4536, Materials science and engineering A, Lausanne, Switzerland, C1

Necking and fracture of advanced high strength steels
Mr Chetan Prabhaka Nikhare, Prof Peter Hodgson, Dr Matthias Weiss (2011) vol. 528, pp. 3010-3013, Materials science and engineering a, Lausanne, Switzerland, C1

The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel
E. Hemmerich, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss (2011) vol. 528, pp. 3302-3309, Materials science and engineering a, Lausanne, Switzerland, C1

 

2010

Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups
Mr Jeerachai Supasuthakul, Prof Peter Hodgson, Dr Matthias Weiss, Dr Richard Yang (2010) vol. 443, pp. 104-109, Key engineering materials, Aedermannsdorf, Switzerland, C1

Die closing force in low pressure tube hydroforming
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2010) vol. 210, pp. 2238-2244, Journal of materials processing technology, Lausanne, Switzerland, C1

Fracture of DP590 steel : a multi-scale modelling approach
Mr Chetan Prabhaka Nikhare, Dr Alireza Asgari, Dr Matthias Weiss, Prof Peter Hodgson (2010) vol. 81, pp. 1450-1453, Steel research international, Weinheim, Germany, C1

The effect of skin passing on the material behavior of metal strip in pure bending and tension
Dr Matthias Weiss, Will Ryan, A/Prof Bernard Rolfe, Dr Richard Yang (2010) vol. , pp. 896-902, NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, Danvers, Ma., E1

 

2009

FEA comparison of high and low pressure tube hydroforming of TRIP steel
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2009) vol. 47, pp. 146-152, Computational materials science, Amsterdam, Netherlands, C1

Crash investigation of side intrusion beam during high and low pressure tube hydroforming
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2009) vol. , pp. 107-112, TUBEHYDRO 2009 : Proceedings of the 2009 International Conference of Tube Hydroforming conference, Kaohsiung, Taiwan, E1

An investigation of complex shapes during low pressure tube hydroforming
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2009) vol. , pp. 879-888, IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, Golden, Colo., E1

Wear mechanisms in forming of HSS and AHSS
Dr Matthias Weiss, Dr Michael Pereira, A/Prof Bernard Rolfe, A/Prof Tim Hilditch (2009) vol. , pp. 691-702, IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the International Deep-Drawing Research Group 2009 annual conference, Golden, Colo., E1-1

 

2008

Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2008) vol. , pp. 272-279, Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, Duesseldorf, Germany, E1

Numerical investigation of high and low pressure tube hydroforming
Mr Chetan Prabhaka Nikhare, Dr Matthias Weiss, Prof Peter Hodgson (2008) vol. , pp. 691-696, NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Zurich, Switzerland, E1

Experimental and numerical evaluation of forming and fracture behaviour of high strength steel
Mr Chetan Prabhaka Nikhare, P.V. Marcondes, Dr Matthias Weiss, Prof Peter Hodgson (2008) vol. , pp. 1-13, TMS 2008 : New Developments on Metallurgy and Applications of High Strength Steels: Steel Conference, Buenos Aires, Argentina, E1

 

2007

The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming
Dr Matthias Weiss, Dr Matthew Dingle, A/Prof Bernard Rolfe, Prof Peter Hodgson (2007) vol. 129, pp. 530-537, Journal of engineering materials and technology, New York, N.Y., C1

 

2006

Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature
Dr Matthias Weiss, A/Prof Bernard Rolfe, Dr Matthew Dingle, John L Duncan (2006) vol. 73, pp. 574-579, Journal of applied mechanics., New York, N.Y., C1

 

2004

The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates.
Dr Matthias Weiss, A/Prof Bernard Rolfe, Dr Matthew Dingle, Prof Peter Hodgson (2004) vol. 2, pp. 445-449, Steel grips, Germany, C1