Publications

Journal Papers:

2023

Fu YF, Long K, Rolfe B (2023) On non-penalization SEMDOT using discrete variable sensitivities. J Optim Theory. https://link.springer.com/article/10.1007/s10957-023-02222-3

Fu YF, Reiner J (2023) Objective and automated calibration of progressive damage models for finite element simulation of fiber reinforced composites. Compos Struct 307: 116618.

2022

Fu YF, Reiner J (2022) Deviation-based calibration for progressive damage analysis in pultruded glass fiber reinforced composites. Int J Damage Mech 31(8): 1115–1138.

Zolfagharian A, Bodaghi M, Hamzehei R, Parr L, Fard M, Rolfe B (2022)  3D-printed programmable mechanical metamaterials for vibration isolation and buckling control. Sustain 14(11): 6831.

2021

Fu YF, Ghabraie K, Rolfe B, Wang Y, Chiu LN (2021) Smooth design of 3D self-supporting topologies using additive manufacturing filter and SEMDOT. Appl Sci 11(1): 238.

Zolfagharian A, Durran L, Gharaie S, Rolfe B, Kaynak A, Bodaghi M (2021) 4D printing soft robots guided by machine learning and finite element models. Sens Actuators A Physical 328: 112774.

Reiner J, Vaziri R, Zobeiry N (2021) Machine learning assisted characterisation and simulation of compressive damage in composite laminates. Compos Struct 273: 114290.

2020

Fu YF, Rolfe B, Chiu LN, Wang Y, Huang XD, Ghabraie K (2020) SEMDOT: Smooth-edged material distribution for optimizing topology algorithm. Adv Eng Softw 150: 102921.

Fu YF, Rolfe B, Chiu LN, Wang Y, Huang XD, Ghabraie K (2020) Smooth topological design of 3D continuum structures using elemental volume fractions. Comput Struct 231: 106213.

Fu YF, Rolfe B, Chiu LN, Wang Y, Huang XD, Ghabraie K (2020) Parametric studies and manufacturability experiments on smooth self-supporting topologies. Virtual Phys Prototyping 15(1): 22-34.

Fu YF (2020) Recent advances and future trends in exploring Pareto-optimal topologies and additive manufacturing oriented topology optimization. Math Biosci Eng 17(5): 4631-4656.

Zolfagharian A, Denk M, Bodaghi M, Kouzani AZ, Kaynak A (2020) Topology-optimized 4D printing of a soft actuator. Acta Mech Solida Sin 33(3): 418-430.

Zolfagharian A, Denk M, Kouzani AZ, Bodaghi M, Nahavandi S, Kaynak A (2020) Effects of topology optimization in multimaterial 3D bioprinting of soft actuators. Int J Bioprint 6(2): 260.

Zolfagharian A, Gregory TM, Bodaghi M, Gharaie S, Fay P (2020) Patient-specific 3D-printed splint for mallet finger injury.  Int J Bioprint 6(2): 259.

Zobeiry N, Reiner J, Vaziri R (2020) Theory-guided machine learning for damage characterization of composites. Compos Struct 246: 112407.

2019

Fu YF, Rolfe B, Chiu LN, Wang Y, Huang XD, Ghabraie K (2019) Design and experimental validation of self-supporting topologies for additive manufacturing. Virtual Phys Prototyping 14(4): 382-394.

Conference Papers:

2022

Fu YF, Long K, Zolfagharian A, Bodaghi M, Rolfe B (2023) Topological design of cellular structures for maximum shear modulus using homogenization SEMDOT. Materials Today: Proceedings. (4D Materials Design and Additive Manufacturing Conference 2022)

2020

Fu YF, Ghabraie K, Rolfe B, Wang Y, Chiu LN, Huang XD (2020) Optimizing 3D self-supporting topologies for additive manufacturing. In: The 12th International Conference on Computer Modeling and Simulation, pp. 220-223.

2019

Fu YF, Rolfe B, Chiu LN, Wang Y, Huang XD, Ghabraie K (2019) Topology optimization of continuum structures. In: The 13th World Congress of Structural and Multidisciplinary Optimization, pp. 448-454.